eFlo 2.0 Electronic Flow Meter Operations Manual
Super Systems Inc.
Page 24 of 39
Network Configuration - Serial Communications Menu
Values are modifiable and are used to set the serial communications.
Press the
button to scroll through the options and highlight each
value for modification.
Modbus Address: Use the numeric keypad to input the desired
settings.
Baud Rate: Used to select the desired Baud Rate. Tap to select.
Parity: Used to select the desired Parity.
Press
to accept changes, or press
to return to the menu
screen without saving changes.
Network Configuration - Ethernet Communications Menu
By default, this menu is passcode-protected. Use the numeric keypad to enter the appropriate
security code.
Values are modifiable and are used to set the Ethernet Settings.
Use the numeric keypad to input the desired settings.
IP 1-4: Used to manually set the IP address of the device.
MA 1-4: Used to manually set the Subnet mask of the device.
GW 1-4: Used to manually set the Gateway of the device.
DHCP: Enabling allows the unit to automatically obtain addressing.
Use the
button to advance/scroll through each setting. Use
to
clear the current selection and use the keypad to enter a new setting.
Press
to accept changes, or press
to return to the menu
screen without saving changes.
Figure 13: Serial
Communications Menu
Figure 14: Ethernet
Communications Menu