Super Systems eFlo 2.0, Operation Manual, Page: 22 / 39

eFlo 2.0 Electronic Flow Meter Operations Manual
Super Systems Inc. Page 22 of 39
Settings Menu
To enter the Settings Menu, press .
The Settings Menu contains seven options including:

Instrument Information & Diagnostics Menu

Basic Configuration Menu

Basic Configuration - Flow Alarm Menu

Network Configuration - Serial Comms Menu

Network Configuration - Ethernet Comms Menu

Instrument Configuration - Gas Menu

Instrument Configuration – Additional Options Menu
Details of each menu option are explained on the following
pages.
Figure 9: Settings Menu Screen
Instrument Information & Diagnostics Menu
This screen displays the following information:

Model: Instrument model.

Serial: Instrument serial number .

31677/31676/31675 Version: Circuit board software version.

Air flow: Calculated air flow from the remote analog
signal when the meter is used in Ratio Mode.

High pressure: Pressure sensor mA reading on the
“high” side of the orifice plate (N/A for the eFlo-H or
eFlo-L meters).

Low pressure: Pressure sensor mA reading on the “low”
side of the orifice plate.

Analog in: Analog input mA signal being received.

Analog out: Analog output mA signals being sent.

Temperature: Gas/Liquid temperature flowing through
the meter.

Valve maximum tare step setting.

Valve zero tare step setting.
Press to return to the menu screen.
Figure 10: Information & Diagnostics Menu