1
-
6
Super Products LLC Publication: 0004175
SAFETY
1
General Hazards and Prevention Safety — continued
Figure 1
-
5
Visibility Conditions When Operating
•
Operate in daylight
or with lights that gives at least
50 yards clear visibility.
•
Be able to see
and identify passersby, steep slopes,
ditches, drop-offs, overhead obstructions, power
lines, debris, and foreign objects.
•
Use extreme care
when backing up. Vision may be
limited. Severe damage or injury can occur.
•
Do not run engines
in enclosed building without
adequate exhaust ventilation.
Mounting and Dismounting Truck or
Equipment
•
Only
mount or dismount when truck and moving
parts are stopped.
•
Always use three-point contact
when climbing on
or dismounting equipment.
•
Walkways, steps, and handrails
should be checked
before use to ensure a proper non-slip surface.
Replace or repair damaged component immediately.
Hot Surface
• Stay clear
of hot surfaces such as mufflers, hydraulic
pumps, valves, and tanks.
• Relieve pressure
from tank, reservoirs, valves, and
hoses before servicing or opening.
Safety Signs
•
Replace
missing, damaged, or unreadable safety
signs immediately!
Equipment Guards
• Never
operate machine if equipment guards are
damaged or missing.
•
Replace
missing or damaged guards immediately!
Summary of Contents for MUD DOG
