Prepare the product, your PC and switch hub ready
for connection. Make sure that your PC has a LAN
port available for connection to the network cable of
the product.
Connect with your power adaptor directly using the
twisted pair (not supplied) after plug the supplied 2pin
connector into
J6
as shown.
J6
● HUB
Micro SD Card Slot
Make sure the orientation of the contacts when
insert the Micro SD card.
External I/O Connector
For further details, please refer to user manual
in the attached CD.
● Power
Twisted-Pair
(Not supplied)
● Power
Twisted-Pair
(Not supplied)
Connect to Alarm/Reset
Connect to an extension I/O terminal block which is used to
connect external infrared detectors, beepers and smoke
detectors.
Insert the Micro SD Card
6
Pin 1 DC 12V out
Pin 2 GND
Pin 3 Audio in
Pin 4 GND
Pin 5 Audio out
Pin 6 GND
Pin 7 RS485-
Pin 8 RS485+
Pin 9 Alarm NO
Pin 10 Alarm NC
Pin 11 Alarm COM
Pin 12 Alarm K
Pin 13 Alarm A
Bullet Network Camera
RMIM-01G06039 Ver:10
N6075
Indoor / Fixed Lens
N6077
Outdoor / Fixed Lens
N6074
Indoor / Vari-Focal Lens
N6076
Outdoor / Vari-Focal Lens