Super Circuits AVSI-12 Setup And User Manual Download Page 59

Page: 59 / 63

AVSI-12 Interview Room System Setup and User Guide

APPENDIX A: PLAYBACK SCREEN CONTROLS

Notes

•

Legend

: Legend defines the type of video clips marked on the timeline

•

Play Controls

: Use the Play Control buttons to speed up, slow down, reverse, etc. The Speed icon shows the speed factor.

Play - Pause

Slower

Reverse

Forward

Backward

Speed

Faster

•

Show sub-periods

: Use this feature to divide play long video files into 4 segments and play them concurrently in a 2×2

split window (four frames) within the video playback window. For instance, if you are playing a video file that is 2 hours long,
the file will be divided into four 30 minute segments, and each segment will play concurrently in a one of the 4 frames.

•

Smart playback strategy

opens a popup window for setting the playback speed of normal video separate from the

playback speed of Smart search video. You can skip normal video during playback.

•

Timeline

: Marks on the timeline indicate video clips. Color of the marks is defined in the Legend. You can drag the timeline

left or right to reposition it at the play head, and use the Timeline Width GUI to expand and contract time span of the line.

•

Switch to sub-stream

: Click this icon to switch between main stream video and sub-stream video.

Time panel - calendar

Click

to change month

Day selected -

double-click

to search for

and play video

Mark shows

video

recorded

on this day

Click to Setup

Custom

Parameters

A.2 Normal Playback

Normal playback shows and plays back all video clips recorded from the selected camera on the selected day.

Open the Playback screen. Go to

Menu | Playback

Summary of Contents for AVSI-12
































































Search results

Summary of Contents for AVSI-12

Reviews:

Related manuals for AVSI-12

Brands by name

Popular brands

Super Circuits AVSI-12, Setup And User Manual

Search results

Summary of Contents for AVSI-12

Reviews:

Related manuals for AVSI-12

Brands by name

Popular brands