52
www.Observint.com
SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM
7.
A
Note
popup window will show the export status.
8.
You can hover the mouse over the filename to see the full filename.
4.7 Import system configuration
You can import a system configuration file you saved earlier to restore your recorder to that configuration. See “4.6 Export system
configuration” on page 50 for more information. The procedure below uses the configuration file created above to restore the
system. You must be logged into the recorder as the system administrator to perform this procedure.
1.
If the configuration file you saved is on a flash drive, insert the flash drive into an unused USB port on your recorder.
2.
Open the
Import / Export
menu. Go to
Menu | Maintenance | Import/Export
.
3.
Locate the file on the flash drive and select (highlight) it.
