10
www.Observint.com
SECTION 3: SYSTEM SETUP
ALARM IN (1)
CAB-ASK cable
To AVSI switch
Back of recorder
Ground (G)
4.
Push and hold in the orange button associated with one if the
G
(ground) terminals, insert the CAB-ASK cable
black
wire all
the way in, and then release the orange button. Tug on the wire to ensure that is securely attached.
3.4 Connect the speakers to the recorder
The speakers provided with the system connect to the recorder AUDIO OUT connector through the AUDIOADAPTER. The AUDIO OUT
connector is located on the back of the recorder between the VGA connector and the LAN connector.
1.
Plug the audio cable from the speakers into the AUDIOADAPTER provided, and then into the AUDIO OUT connector on the
back of the recorder. See below.
