Supco VLTS, Operating Manual, Page: 37 / 44

Temperature recorder and printer
35
A
PPENDIX
A D
EFAULT
S
ETTINGS
To reset setting to factory defaults, do the following:
1.
Turn off the device, disconnect the backup battery and the power supply.
2.
Hold down and connect the power supply.
3.
After about 6 seconds, the display will turn on. Release .
4.
All the menu settings will revert to the factory settings and the readings will be
displayed.
Note: Restoring defaults does not delete records.
Recommended: print and save the Print, Spec & Programming settings report after
every change in the settings. See “ Printing on-Demand reports ” , page 14.
Table 6 lists the VLTS default settings.
Table 6: Default settings
G
ENERAL
D
EVICE
S
ETTINGS
Real-time printing
[See page 11]
Sampling Rate
[See page 26]
Daily min/max print
[See page 24]
Min/max print time
[See page 24]
No 15 Min. Yes 08:00
Unit Name
13 characters
[See page 25]
Vehicle/ Object Name
13 characters
[see page 25]
Company Name
13 characters
[See page 25]
Password (default)
4-character string
from left to right
[See page 25]
Instrument 123 Office 1 SUPCO
Fahrenheit/ Celsius
[See page 24]
Date Format
[See page 24]
Overwrite SD/USB
[See page 26]
Sensor Error Alarm
[See page 22]
Celsius dd/mm/yyyy Yes Yes
Buzzer enabled: Yes Internal buzzer activation General alarm events [page 22]
Clock Bat. Hot ambient 65 0 C No paper USB full
Yes Yes No No
Backup bat. Copy prog No Power SD full
Yes Yes No No