background image

TOOLS NEEDED

Adjustable hole saw bit or Jig Saw (Sabre Saw).

NOTE:  ALWAYS WEAR SAFETY GLASSES 
WHEN DRILLING OR CUTTING

1

 

Determine the grommet placement on your 

desk or table top. Use the attached template as your 
guide to set hole saw diameter, or as a pattern for 
the Jig Saw. Tape the pattern to top.

Drill a hole in the center large enough for the 

saw blade to start cutting. Closely follow the circle 
perimeter with the blade.  

3

 

Feed the cables through the hole first and seat 

grommet in place. 

If  hole is a little loose for grommet, you can use a 
hot melt glue to fix in place.

4

 OPERATION 

Plug the power cord into a wall outlet. 

Using a standard Ethernet Patch Cable, plug one end 
into wall Ethernet Wall Jack or Router and the other 
end into one of  the Short Pigtails of  the PowerTap. 
Repeat step for second Ethernet Port. 

Slide tab back to enable pivoting the PowerTap.  
When rotation is complete it will lock in place.

Product Warranty

: Sunway warrants its product 

for period of  one year from date of  purchase. We will 
repair or replace any product found to be defective in 
material or workmanship during the warranty period.

ASSEMBLY INSTRUCTIONS

T H E   H I D D E N   P O W E R   C E N T E R

Reviews: