OPERATION & MAINTENANCE MANUAL SWE18UF
3
terminal start-up).
1.10 FORBIDDING CARRYING PASSENGERS
When the machine is operating or traveling, prohibit other people except operator staying
on the machine.
1.11 KEEPING MACHINE AWAY FROM POWER TRANSMISSION LINE
Any part or load of machine touching electricity
transmission line will cause human death or GBH.
Prohibit machine or its load being close to electricity
transmission line, the machine should be 3 meters away
from line.
1.12 MOVING MACHINE SAFELY
Before the machine travels and swings, operator
should know the position of other people.
When machine travels or before it swings, operator
should warn other people by honking the horn.
Operation at confined area should use signal in
swinging, and harmonize the hand signal before
machine start-up.
Before operating the machine traveling, the operation
of
traveling
pedal/control
lever
should
be
corresponding with the traveling direction.
Step on the foreside of traveling pedal or push
traveling lever forward, and the machine will travel
along tension wheel. By contraries, the machine will
travel along sprocket wheel.
When machine travel on a slope, place bucket as
figures, keep bucket 200-300mm above the slope
ground, if the machine slides or becomes unstable,
lower the bucket at once.
1.13 PREVENTING ACCIDENTS WHILE BACKING OR SWINGING
In order to prevent accident while backing or
swinging, the operator must follow:
Before back or swing the machine, look round and
confirm nobody is around.
Ensure that other people stand out of the boom swing
range.
Pay attention to that whether other people stay in
work range or not. Honk the horn or use other signals
to warn before moving the machine.
