SUNWARD SWE155F Page 18 Operation & Maintenance Manual Download

Page: 18 / 188

OPERATION & MAINTENANCE MANUAL SWE155F

(19) Pilot Safety Lock Label

(20) Fuel Label

Warning



Handle fuel with extra care because it’s

highly flammable. In case that fuel is

ignited, this can cause explosion or fire,

and even death or injury to person.



Always refilling fuel at outdoor. Before

refilling, the engine should be shut down.



Do not refill fuel while smoking or near fire or

sparks.



All fuel and most of lubricants are flammable.



Flammable liquid should be stored at proper

place far from fire.



Do not burn out or stab at pressurized

container.



Do not store rags containing oil. This can

cause self-ignition and can be lighted up.



Fasten cap of filling opening.

Summary of Contents for SWE155F





























































































































































































Search results

Summary of Contents for SWE155F

Reviews:

Related manuals for SWE155F

Brands by name

Popular brands

SUNWARD SWE155F, Operation & Maintenance Manual

Search results

Summary of Contents for SWE155F

Reviews:

Related manuals for SWE155F

Brands by name

Popular brands