Quick Set-up Guide
1
© 2015 SunTouch
Snow Melting Control PM-653
1.
Location
2.
Remove Mounting Base
3.
Install Mounting Base
Interior
Wall
5 feet
1.5 m
Exterior
Wall
Behind
Door
4.
Switch Settings
5.
Wiring
Back of
Control
LOCK ACCESS LEVEL
The control is locked and the access level
cannot be changed. Set to Lock when
installation has been completed.
UNLOCK ACCESS LEVEL
The control is unlocked and the access
level may be changed. Go to the Toolbox
menu to change the access level. Set to
Unlock during the installation process.
1058-06
Switch
Se
ttings
Lock
Unused
Unlock
1 2
Snow / Ice
Sensor PM-090
Outdoor
Sensor
PM-070
Slab Sensor
PM-072
Slab
Brn
Slab
Brn
Com
Blk
Yel Blu Red
Com
Blk
Yel Blu Red
Or
And/Or
24V C PM
Snow Sensor
PM-095
ProMelt
Contactor Pro
CP-50,
CP-100,
CP-200
Snow
Sensor
095
Slab
Brn
Ht
R
C
Out
Com
–
Blk
Yel Blu Red
This Quick Set-up Guide is not intended to provide full installation instructions
and safety information. In order to avoid property damage or injury, please
refer to the complete installation manual and product safety information
provided with the product.
Base
Stud
Base
Stud
3 ¼
"
(83 mm)
Electrical
Box
