4th
Ⅲ
. Installation Steps
3.1. TX
The right step to turn on the system:
1) Install the antenna of the TX
2) Connect the camera with TX
3) Connect the power with TX
4)
Turn on the power
5) Turn on the TX
Now the transmitter is in working state.
3.2. RX
1) Install the two pics antennas
2) Connect RX with Monitor Display by AV cable
3) Connect RX to power
4) Turn on power
5) Turn on the RX
Now the receiver is in working state
Ⅳ
. Adjust the Parameters
4.1. Steps:
1
1. Connect the antenna of TX
2
2. Turn on Power of TX
3
3. Modify the parameters of TX and then continue to modify the RX parameters