3rd
ELECTRONICS CO., LIMITED reserves all copyrights of the product and the manual. All the
information must not be copied or reproduced in any form without permission of SUNTOR. There
may be semantic differences between disclaimers of different languages. The Chinese version shall
prevail in Chinese mainland, while the English version shall prevail in other regions. Thank you for
purchasing SUNTOR ST5XHPT. Please use ST5XHPT according to local radio regulations. Before using,
please carefully read this disclaimer. Once the product is used, all the contents of the disclaimer will
be regarded recognized and accepted. Please install and operate the product in strictly accordance
with the requirements of this manual. SUNTOR ELECTRONICS CO., LIMITED and its affiliates will not
assume any legal responsibility for results or losses caused by improper use, installation, assembly
and modification (including the use of non-specified SUNTOR parts and accessories, such as the
radio power amplifier, antenna and SMA extension cord).
II. Precautions for integration
1) Be sure to use the parts provided by SUNTOR.
2) Reverse connecting power line positive and negative will burn the device out.
3) Before powering on please make sure the antenna are in good connection and not install or
remove the antennas with power on.
4) Given that the carbon fiber body and metal load may have shielding effects on antenna signals,
they should not be installed between the antenna and ground terminal. Keep the antenna on
board free from winding or blocking by obstacles. The antenna end should be vertically
downward without bending to prevent shortening communication distance and failure
communication.
5) Antennas on board should be kept away from other radio antennas to avoid electromagnetic
noise and interference. We recommend to make full use of data and video transmitting
function of ST5XHPT to minimize the radio devices quantity on board.
6) If using PTZ Camera, please do the PTZ self-testing firstly then connect HDMI cable.
7) HDMI cable and antenna on board may interfere with GPS. Please keep the HDMI cable and
antenna away from the GPS module and its cables.
8)
Do not disassemble or modify SUNTOR ST5XHPT. Any problem during installation, contact
SUNTOR or SUNTOR local branch office.
9) Keep appropriate distances between different electronic devices during installation to minimize
the electromagnetic interference.
10) The power input is DC7-18V. We recommend the DC12V. Make sure the battery is full of
charged.
11) Before using, please make sure all cables are in good connection and all components can work
properly.
Summary of Contents for ST5XHPT
Page 1: ...1st...
Page 12: ...12th...
