10th
5. Boot up successfully
After successfully connection, the display will smoothly show the video.
Remark: In UAV application, please make the connection successfully and the video show on ground station
smoothly then fly the UAV. About how to install the antenna on UAV please refer the following description.
VI. Antenna Installation
1. Multi-rotor UAV
1) Using SMA metal shielded semi-flexible blue feeder cable provided by SUNTOR to connect the
TX SMA port with antenna.
2) The antenna needs to be mounted vertically downwards.
3) The best installation location is
UAV ground bracket. With
antenna inside, the bracket can
only use fiberglass material.
4) If the ground bracket is
automatically retracted, the
antenna can be installed in the
lower part of the aircraft.
5)
If the antenna is intercepted by
the camera or pod or the
loudspeaker, the video on RX will
appear image stuck or mosaic.
SMA Feeder Cable
Summary of Contents for ST5XHPT
Page 1: ...1st...
Page 12: ...12th...
