Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
41 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
DTC
EIDLE
F_ECO
Field
Marks
Meaning
HDR
“ST300GED” Engine Data report header
Res
“Res”
Response
DEV_ID
6 char.
Device ID
SW_VER
3 char.
Software Version
DATE
8 char.
GPS date (yyyymmdd)
TIME
8 char.
GPS time (hh:mm:ss)
CELL
String
Location Code ID(3 digits hex) + Serving Cell BSIC(2 digits decimal)
LAT
String
Latitude (+/-xx.xxxxxx)
LON
String
Longitude (+/-xxx.xxxxxx)
SPD
String
Speed in km/h
CRS
String
Course over ground in degree
SATT
String
Number of satellites
FIX
‘1’ or ‘0’
GPS is fixed (1), GPS is not fixed (0)
DIST
String
Traveled distance by meter
PWR_VOLT
String
Voltage value of main power
I/O
6 char.
Current I/O status of inputs and outputs
Ig Input 2 + Input 3 + Out1 + Out2
Ignition :
‘1’ (ON), ‘0’ (OFF)
Input1 ~ Input3 :
‘1’ (Ground, Shorted), ‘0’ (Opened)
Out1 ~ Out2 :
‘1’ (Active), ‘0’ (Inactive)
TO
String
Odometer in Km/h
TF
String
Total fuel used in Lts (liters)
VS
String
Vehicle Speed In Km/h
IF
String
Idle Fuel in Hr
E_TMP
String
Engine Coolant Temperature in C
OIL_PRE
String
Oil Pressure in kPa
E_RPM
String
Engine RPM
T_CRU
String
Total Cruise Active time in sec.
DTC
String
DTC code
High byte: active error code
Low byte: Previous active error code.
It is a hex code, not decimal.
E_IDLE
String
Engine Idle time in sec
F_ECO
String
Fuel Economy in km/L
<Example>
ST300GED;Res;850000;010;20080101;00:02:37;00000;+36.127.885968;000.000;000.00;0;0;0;11.93;
000000;0;181312.00;0.00;0.00;60;0;40.00;17;0;0.00;0.00
4-15. LATAM (Latin America) parameters
In order to set these various parameters properly, read carefully the contents and <Example> along with <Note>
described in the bottom inside the table below. In setting a new device, the
‘SyncTrak’ will show you detailed
explanation on how to set parameters relating to these
‘Fields’.
