Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
40 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
Default : 0
<Example>
[command] ST300ECU;850000;02;1;120;100;200;100;8000;14.3
;0
[response] ST300ECU;Res;850000;02;1;120;100;200;100;8000;14.3
;0
[response] ST300ECU;Res;850000;02;CE
<Note>
If the device cannot initialize the MCU for J1939, it will be reporting error such as
‘CE’.
4-14-2. How to Get ECU Command Parameters
The following table shows how to get information about the parameters of commands relating to ECU.
HDR DEV_ID VER MODE EVS SPD ET OIL_P ERPM SHB ADD_CLAIM
Field
Mark
Value
Meaning
HDR
“ST300GES”
Command type
DEV_ID
6 char.
Device ID
VER
“02”
Protocol Version
<Example>
[command] ST300GES;850000;02
[response] ST300GES;Res;850000;02;1;120;100;200;100;8000;14.3
;0
4-14-3. Requesting Information about ECU (or ECM) by J1939
The following table shows how to get information about ECU (or ECM
: Electronic Control Module
)
compliant with J1939
HDR
DEV_ID
VER
Field
Mark
Value
Meaning
HDR
“ST300GED”
Command type
DEV_ID
6 char.
Device ID
VER
“02”
Protocol Version
<Example>
[command] ST300GED;850000;02
[response]ST300GED;Res;850000;292;20110101;02:06:16;00000;+19.445873;-
099.126891;000.000;000.00;0;0;0;12.39;000000;0;0.00;0.00;0.00;0;0;0.00;0;00000000;0.00;0.00
HDR
Res
DEV_ID
SW_VER
DATE
TIME
CELL
LAT LON SPD CRS SATT
FIX
DIST
PWR_VOLT
I/O
TO
TF
VS
IF
E_TMP
OIL_PRE
E_RPM
T_CRU
