Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
120 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
8-17. Command on how to get Google Map Address
In case this command is made, the pre-set existing Google Map address will be known.
Definition: Get Google Map Address.
Field
Mark
Value
Meaning
CMD_ID
“
ReqGoogleMap
”
Request the Google Map Address.
This command is followed by
“
=
”
and Google Map Address.
<Example>
[command] ST300CMD;100850000;02;ReqGoogleMap
[response] ST300CMD;Res;100850000;010;ReqGoogleMap;http://maps.google.com/maps?q=
8-18. Command on how to do Simultaneous Testing for Output 1 & 2 for 30 seconds
The following tables show how to test the two outputs (i.e. Output1 and Output2) at the same time for 30 or 60
seconds.
Field
Mark
Value
Meaning
CMD_ID
“ReqShortTest”
Request the device to activate all outputs to do testing at
the same time for 30seconds.
<example>
[command] ST300CMD;100850000;02;ReqShortTest
[response] ST300CMD;Res;100850000;259;ReqShortTest
Output 1 and Output 2 will be activated for 30 seconds for the testing. In 30 seconds, the two outputs will be
deactivated.
Field
Mark
Value
Meaning
CMD_ID
“ReqTest”
Request the device to activate all outputs to do testing at
the same time for 60seconds.
<Example>
[command] ST300CMD;100850000;02;ReqShortTest
[response] ST300CMD;Res;100850000;259;ReqShortTest
Output 1 and Output 2 will be activated for 60 seconds for the testing. In 60 seconds, the two outputs will be
deactivated.
8-19. Command on how to Improve Battery Life
For the purpose of reducing power consumption of the battery while the main power line is
disconnected (only
backup battery sources power), the server can make this command.
Field
Mark
Value
Meaning
CMD_ID
“
ImproveBatteryLife
”
‘0’ or ‘1’ 0 : Maintain status of activated GPS chip only in
movement state.
