Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
106 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
7-6. Enable1 (
‘Activating Output 1’)
[EXTRA_INFO]
HDR
DEV_ID
SW_VER
DATE
TIME
CELL
LAT
LON
SPD
CRS
SATT
FIX
DIST
PER_VOLT
I/O
MODE
Field
Mark
Value
Meaning
CMD_ID
“Enable1”
Enable Output1
<Example>
[command] ST300CMD;100850000;02;Enable1
[response] ST300CMD;Res;100850000;010;Enable1;[EXTRA_INFO]
[EXTRA_INFO : Extra information]
20140213;05:16:03;04f54;+37.126.886010;000.000;000.00;0;0;3095;13.43;000000;1
[response] SA300CMD;Res;100850000;010;Enable1NoUse (in case that IN type is set to
‘No Use’).
<Note>
** Output1 line goes to active status.
** If OUT1 is set with immobilizer, output1 line goes to the Active Status gradually with pulse in driving mode.
** If OUT1 is set with pulse type, output1 line generates pulse and automatically returns to the Inactive State
after pulsing out.
7-7. Disable1 (
‘Inactivating Output1’)
Field
Mark
Value
Meaning
CMD_ID
“Disable1”
Disable Output1
<Example>
[command] ST300CMD;100850000;02;Disable1
[response] ST300CMD;Res;100850000;010;Disable1; EXTRA_INFO
[response] ST300CMD;Res;100850000;010;Disable1NoUse (in case that IN type is set to
‘No Use’).
<Note>
** Output1 line goes to the Inactive Status.
7-8. Enable2 (
‘Activating Output 2’)
Field
Mark
Value
Meaning
CMD_ID
“Enable2”
Enable Output2
<Example>
[command] ST300CMD;100850000;02;Enable2
[response] ST300CMD;Res;100850000;010;Enable2; EXTRA_INFO
[response] SA300CMD;Res;100850000;010;Enable2NoUse (in case that IN type is set to
‘No Use’).
<Note>
** Output2 line goes to the Active Status.
** If OUT2 is set to immobilizer, output2 line goes to the Active Status gradually with pulse in driving mode.
