19
ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ
ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
ing the
“HT”
button.
7.3.4. Settings.
1. Setting the water thermostat.
Pressing the buttons
+
and
-
for the
first time displays the temperature set
-
ting. Additional button presses (within 8
seconds) changes the values. After wait
-
ing for 5 seconds, the new setting will be
saved when the blink stops.
2. Switching between
individ-
ual programs is performed by pressing
the buttons
Р
. The selected program is
indicated by the indicator light and the
display when the button
Р
is pressed
for the first time . (see the mode table).
Pressing the button
Р
within 8 seconds
switches between individual programs.
3. Preview and parameter set-
tings.
You can enter the parameter menu by
briefly and simultaneously pressing the
buttons
+
and
-
after which the
same buttons can be used to toggle be
-
tween parameters.
When the desired parameter is selected,
you must wait for 8 seconds for the dis-
play to show the perimeter value. After
another 8 seconds, the display returns to
the main menu, which displays the cur-
rent water value in the tank.
4. Set the interval for automatic
thermal disinfection
You can enter the parameter menu by
briefly and simultaneously pressing the
buttons
+
and
-
. Switching between
screens is done with the same buttons.
Select parameter “
L2
” and after a few sec
-
onds set the overheating interval (factory
setting is 14 days). After setting the de
-
sired value, wait 5 seconds, and after the
blink stops, the setting will be saved.
9. INITIAL CONTROL
Check before operating the device:
- Proper grounding of the machine;
- Protection of the contact;
- Proper pipe layout.
- In the beginning and after a few days
of operation, check the screws on the in
-
spection hole.
