Sunsystem BURNIT AMBIENT V2 4G 10 Plus, Installation And Operation Manual

Page: 15 / 32

15
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
8.3. Requirements for the cleaning and
maintenance of Ambient V2 4G stove.

IMPORTANT! Do not use acid-
containing detergents or
flammable liquids for cleaning.

Caution! Hot surfaces.
Before cleaning the boiler, make
sure the fire in it has died out and
the boiler has cooled down.
Regularly clean the pellet stove and the
flue gas system. This will ensure efficient
operation of the stove.
8.3.1. Inspection and cleaning of fresh air
system
It`s mandatory to inspect the fresh air
system at the beginning of each heating
season. Any malfunctioning must be
repaired.
8.3.2. Inspection and cleaning of exhaust
gas system
It`s mandatory to inspect the exhaust gas
system at the beginning of each heating
season. If the electric cable is damaged
should be replaced with a new one.
TAR is liquid formed during poor
combustion and low temperature in
exhaust gas tube. If exhaust gas tube is
layered with tar, insulate well the outside
of exhaust tube. Tar deposition may cause
fire. It`s mandatory at least once per
heating season inspection and cleaning of
exhaust gas system.
8.3.3. Cleaning and maintenance of the
pellet stove.
Cleaning and maintenance of the pellet
stove must be performed regularly.
- Clean the stove outer surface, glass, rope
on the door, ash container periodically.
- Clean the pellet burner daily.
- Clean the pellet hopper once per month.
- It‘s mandatory to clean stove totally for
burned pellet amount of 800 kg to 1000
kg or once per year.
When making routine check the
authorized service must do as following:
• Cleaning the fan;
• Cleaning all the inaccessible places
burner;
• Complete check of the ignition system
and the pellet loading system;
• Complete check of the condition of the
insulations ropes on the door and to
change it if needed.
• Dismounting and cleaning the
T-connection of the exhaust gases
system
• Complete check of all the electrical
parameters;
• Issuing an inspection report for the
actions performed;
8.3.4. Cleaning the outer surface of pellet
stove
Use soft cloth and neutral cleaning
detergents.