Sunrise Internet Box User Manual Download

Page: 43 / 162

Sunrise Internet Box User Manual

Page 43

3.3.10

Maintenance

3.3.10.1 Resets

Objective:

This menu is used to reset to the factory configuration.

The existing configuration is completely overwritten.

•

Save all the modifications made to the current configuration and restart the Sunrise Internet Box
with its new parameters.

•

In the

My Sunrise Internet Box

menu, select

Maintenance > Resets

. The following screen

opens:

To restart the Sunrise Internet Box:

•

Click on the

Restart

button.

The process takes around 2 minutes.

A waiting wheel is displayed during restart.

The Login page will automatically appear once available.

Important

Note

Summary of Contents for Internet Box



































































































































































Search results

Summary of Contents for Internet Box

Reviews:

Related manuals for Internet Box

Brands by name

Popular brands

Sunrise Internet Box, User Manual

Search results

Summary of Contents for Internet Box

Reviews:

Related manuals for Internet Box

Brands by name

Popular brands