Sunrise Internet Box User Manual
Page 23
3
Information / Configuration
3.1
Accessing the welcome screen
The configuration of the Sunrise Internet Box can be performed using an Ethernet
connection (
PORT1
to
PORT4
) or via the Wi-Fi connection, depending on the device used
(computer, tablet, etc.).
Your Sunrise Internet Box is then configured using a simple Web browser (e.g. Microsoft Edge).
The Sunrise Internet Box's DHCP server function is activated by default
with an address range defined as indicated in Sub-section 3.3.2.
To access the user interface, proceed as follows:
1.
Open a web browser and enter the address:
If you are trying to access this page via Wi-Fi connection, please
make sure that you are connecting to one of the main SSIDs (the
default SSIDs can be found on the bottom of the Sunrise Internet Box
on the product label). It is not possible to access the user interface by
connecting via the Wi-Fi Guest Access (Section 3.7.3).
2.
In the login screen that appears, enter your password.
By default, the initial password is indicated on the label of the product.
The equipment's IP address (192.168.1.1) appears in the header bar.
3.
Click on
LOGIN
to validate.
Note
Note
Note
