Sunrise telecom XTT 5000, User Manual

Page: 64 / 181

XTT 5000 User's Manual
the proper
datagram or
payload of the
payload.*
ol-numbers. Commonly used
values include 6 (TCP) or 17
(UDP).
* For example, setting the Protocol
field to 001, which indicates an ICMP
payload, does not create an ICMP
payload in the test traffic. This can
cause problems with network
elements who look at the Protocol
field and attempt to process the non-
existent protocol payload.
Flow Label
(Ver6) 20 bits Specifies special router handling,
source to destination(s), for a
sequence of packets.
Next Header
(Ver6)
8 bits Specifies the next encapsulated
protocol, or the presence of an
extension header.
Hop Limit (Ver6) 8 bits Packet TTL count.
Type of Service Parameters
Statistic Options Details
Precedence
(RFC1349)
3 digit value Enter the Precedence using the
number pad.
MBZ 0, 1 Select a MBZ (Must Be Zero) on the
Number Pad.
TOS Value Enter the type of service.
• Leave it at 0 if you are unsure of
what to select.
• See RFC 1349 and RFC 2474 for
technical details.
DSCP (Bits 0-5) Enter the RFC 2474 DSCP bits.
Currently Unused 0,1 for two bits Enter the two bits. Reserved
Where do you want to go next?
Throughput Stream Table Setup
Throughput Summary Results
Throughput Aggregate Results
Tech: IP Overview
Home
58