Sunrise telecom XTT 5000, User Manual

Page: 26 / 181

XTT 5000 User's Manual
Measurement Setup Home
Configure how and when results are taken.
Parameter Options Details
Start Mode PROGRAM : Program a specified
date and time in the future to
begin taking measurements. Once
you have selected Program, enter
the desired date and time in the
next two items.
MANUAL : Manually begin the test
measurements.
Select the method to
begin your test
measurements.
Stop Mode CONTINUOUS: Test will run
indefinitely until you press 'Stop'.
TIMED: Test runs for the Test
Duration length of time.
Set the mode in which
measurements will be
taken.
Start Time Specify the Hour, Minute, and
Seconds to begin measurements.
Start Mode=PROGRAM.
Test
Hours/Minutes
Enter the number of Hours and
Minutes you want the test to run
for in those fields.
Stop Mode=TIMED.
Set the length of time
a timed test will run
once you press 'Start'.
Start Date Enter the Year, Month, and Day to
begin measurements. Start Mode=PROGRAM.
On the calendar which
appears, use the
arrows to scroll to the
month you want, then
tap the specific date.
Save Mode Auto_Save : Results are saved
automatically when the test is
stopped. A file name will be
assigned automatically.
Never_Save : Results are not
saved.
Manual_Save : Results are saved
when the test is stopped. A dialog
box will appear for you to input a
filename in.
Select the method to
save your test
measurements.
Start TX
Coupled On : The transmitter and
measurement begin at the same
time.
Off : A 'TX On' button appears on
the Action Bar. This button is
grayed out until the measurement
is started. Once the measurement
is started, press the 'TX On' button
to begin sending traffic.
Determine when the
transmitter will turn
on.
To access the window, touch Measurement Setup on the
System Setup menu.
20