Maintenance
and
Inspection Schedule
Daily
*
Weekly
Quarterly
*
Daily check routine as described in Section 8.1, Page 27
Weekly check routine as described in Section 8.1, Page 28
Clean wheelchair upholstery
(
&
Seating system
)
Annually
Complete inspection, safety check
,
and service should be made by
a Sunrise Medical authorized dealer
Quarterly check routine as described in Section 8.1, Page 28
End user / caregiver
To be performed by:
Sunrise Medical
authorized dealer
* Daily = Before each use of the wheelchair. Quarterly = Every three (3) months.
If fasteners are found to be loose a Sunrise Medical authorized dealer should tighten the fastener to the
torque setting per size detailed below, unless stated otherwise in all appropriate owner’s manuals or
installation instructions (if applicable).
• M8 Fasteners =
13.5-14.9 Nm [
120-132
in-lbs]
• M6 Fasteners =
6.8-7.9 Nm [
60-70
in-lbs]
• M5 Fasteners =
3.1-3.6 Nm [
27-32
in-lbs]
• M4 Fasteners =
0.7-0.9 Nm [
6-8
in-lbs]
Q500M/Q400M General Manual
29
248035
Rev.
G
