O x f o r d R a n g e o f M o b i l e H o i s t s
1
Maintenance, Inspection And Test
Sunrise Medical Ltd recommend a thorough inspection and test of the Oxford Mobile
Hoist lifting accessories, slings etc. is carried out every six months. The examination
and test should be conducted according to the recommendations and procedures below.
Sunrise Medical Ltd recommend maintenance, inspection and certified testing is carried
out by authorised service dealers only.
Note:
These recommendations are in compliance with the requirements of 1998 No2307
Health and Safety: The Lifting Operations and Lifting Equipment Regulations 1998.
This is a UK regulation. Outside the UK please check your local requirements.
•
SPREADER BAR:
Check the spreader bar for freedom of rotation and swing. Check
for wear on the central pivot. Check for firm attachment to the boom. Inspect for
excessive wear on the sling hooks and any side suspenders used in conjunction with
the spreader bar.
•
BOOM:
Check the attachment of the boom to the mast. Make sure there is only
minimal side movement of the boom and the boom is free to rotate on the boom
bearing. Check the actuator or hydraulic unit mounting on the boom.
•
MAST:
Check the operation of the mast locking device. Make sure the mast fully
engages into the socket. Check the bottom actuator or hydraulic unit mounting.
•
POWER PACK (Electric only):
Check the function of the Emergency Stop button.
Inspect the handcontrol socket for correct fitting. Inspect the power/charging socket
for correct fitting. Check functioning of hand control.
•
LEG ADJUSTMENT:
Check the leg linkages are secure and the leg adjustment
handle is located correctly in the leg adjustment gate. Operate the leg adjusting handle
and confirm smooth opening and closing of the legs. Adjust linkages if necessary.
•
LEG PIVOTS:
Check the leg pivots are secure and the legs pivot freely. Any stiffness
must be investigated. Strip out the leg pivots and lubricate with a light mineral based
grease if in any doubt. Make sure there is no excessive play in the leg pivots.
•
CASTORS:
Check all castors for firm attachment to the legs. Check for free rotation
of the castor and the wheels. Remove any build up of threads, hair or fluff.
Lubricate if necessary with a light mineral based grease. Check correct operation of
the brakes.
•
ACTUATOR (Electric only):
The actuator should require no maintenance other than
checking for correct operation and listening for unusual noise.
Summary of Contents for Oxford MAJOR 190
