MN3000100028
Page 6
Chapter 2: Getting Started
2.1 Hardware Installation
1.
Plug the power adapter into the power jack of the USB 3.1 Gen2
A+C 4-Port Hub. (If power adapter is available)
2.
Plug the USB 3.1 Gen2 A+C 4-Port Hub into an available USB
Type-C port on your computer.
3.
Upon powering up your computer, the USB 3.1 Gen2 A+C 4-Port
Hub will be recognized by the computer’s operating system.
4.
Once complete, you are ready to plug all peripheral devices into
your new USB 3.1 Gen2 A+C 4-Port Hub.