RK612A
RK612B User Manual
HOW TO USE THE RF KEYBOARD
1. Insert the receiver into the USB port.
2. Your operation system will start to install the receiver automatically. And you
can see the information as below display in your computer.
3. In Win98/Me operation system you need to follow the instructions on your
screen. During the install process, the O/S may ask you to put Win98 CD into
the CD-ROM.
4. After the install process finished, the keyboard will be working.
Better than other competition:
1. RF (2.420GHz) Any angle, up to 7 Meters.
2. 256 ID and RF-technique to Anti-interference.
3. No matter what PC Off or Battery Out, The ID will not be lost.
Notice:
If the keyboard is not working:
1. Maybe no power, please check your battery .
2. Maybe different ID, please link ID.
(1). push the button on Receiver.
(2). press “Fn” key on keyboard within 3 SEC .
CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment.