1.
The delay time between buttons is within 6
seconds. If there is no input within 6 seconds,
the remote will exit the current setting
procedure
2.
The motor will jog and beep as a hint. Continue
programming after the hint.
UPPER LIMIT
Move the screen up to the desired upper
limit
LOWER LIMIT
Move the screen down to the desired
lower limit
Adjust Upper Limit
Adjusting Lower Limit
Motorized Screen
Remote Instructions
DD2700H Remote
–
Single Channel
DD2702H Remote - 15 Channel
1 Pairing
IMPORTANT READ ME FIRST
Apply power to motor (1 jog and
long beep once), within 7s,
press STOP for 2s (2 jogs and 3
beeps), the motor has been
paired successfully
2 Switching Rotating Direction (Optional)
If the UP button is pressed, but the
screen goes down, you will need to
complete this step
Press and hold the UP and DOWN buttons
simultaneously for 2s, motor will jog once
and rotation will be switched successfully
*The motor needs to be in the reversing operation
without limits
3 Setting Upper and Lower Limits
Press and hold UP + STOP
simultaneously for 2s (2
jogs, 3 beeps) upper limit
is set
Press and hold DOWN +
STOP simultaneously for
2s (2 jogs, 3 beeps) Lower
limit is set
4 Adjusting Limits
Press and hold UP + STOP
simultaneously for 5s (1
jog, 1 Long beep) Repeat
step 3
Press and hold DOWN +
STOP simultaneously for
5s (1 jog, 1 Long beep)
Repeat step 3
