background image

Owner’s Manual

 

WAR-833

 

Fire 

Column

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or 

property damage. Read the owner’s manual thoroughly before installing or servicing this 

equipment. If the information in this manual is not followed exactly, a fire or explosion 

may result causing property damage, personal injury or loss of life.

Save these instructions for future use. If you are assembling this unit for someone 

else, give this manual to him or her and read and save for the future.

DANGER

WARNING

WARNING

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from
the appliance and immediately call 
your gas supplier or fire department.

Do not store or use gasoline or other 
flammable vapors and liquids in the 
vicinity of this or any other appliance. 
An LP-cylinder not connected for use 
shall not be stored in the vicinity of 
this or any other appliance.

For outdoor use only.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the 

items we sell. Replacement parts or products will be sent at our discretion within the 1-year 

warranty  period.  Proof  of  purchase,  with  the  date  of  purchase  as  well  as  photos  of  the 

merchandise defect, must be provided. Photos are used to determine the cause of defects and 

for future quality control. Register your warranty at   

www.serenityhealth.com/warranty/

If you have any questions, comments or concerns, feel free to contact us by phone at 

888-881-4668, by email: 

[email protected]

, or via our contact us page at 

www.SerenityHealth.com/contact-us/

Purchase Date:        /        /        

  Order/Customer Ref. Number:

1

Summary of Contents for WAR-833














Reviews: