Parts List/Assembly Table
INSTALLATION INSTRUCTIONS
1. Put the basin stand on a clean level surface that cannot be damaged by
water.
2. Put the pump in the fountain basin, thread the electric cord through the
pipe that is not in the center down into the center of the stand.
3. Put the upper fountain on its edge (as shown).
4. Connect the hose to the pump.
5. Put the upper fountain in place make sure it fits all the way down. Do not
force wiggle and push gently down until it sits on the bottom.
6. Put the pump cover in place.
7. Connect a 1lb propane tank to the metal connection inside the column.
8. Fill the clean water.
9. Put the proper tank cover in place.
10. Start as per operating instruction (following page).
11. Plug pump outlet into a properly grounded outlet, check the water flow.
Summary of Contents for WAR-191
Page 1: ...5010198 1 OWNER S MANUAL Item No WAR 191 READ BEFORE USE...
Page 11: ......
