INSTALLATION INSTRUCTIONS
WARNING:
This item is heavy. All necessary
precautions should be taken when lifting
and assembling this fireplace.
Make certain the fireplace body always
remains upright. Do not lie on its side or
you could cause damage to the body.
Most parts of this fireplace are pre-assembled
before shipment. Please follow below assembly
instructions before you start to enjoy your
fireplace.
Step 1:
Carefully unpack the product, and take
out all the components. Make sure you take out
all the packaging materials as well.
Step 2:
Put the fireplace body on the final
position. It should only be put on a flat and
NON-COMBUSTIBLE
floor, and there must be a
minimum of 24 inches of clearance from the
tabletop to
COMBUSTIBLE
walls. Make sure the
valve on the control panel is turned all the way
clockwise to the “OFF” position. (Figure 1)
Step 3:
Put up the body (Figure 2), put up 1
pound gas tank’s adopter to connect valve
assembly tight it up by clockwise direction.
(Figure 3)
Step 4:
Put the
lava rocks
around the burner.
Make sure the height of
lava rocks
don’t be over
the rim of top(Figure 4)
Now you’re ready to enjoy your pillar fireplace.
Follow the operation instructions when you’re
using this appliance
(Figure 1)
(Figure 2)
(Figure 3)
(Figure 4)
Summary of Contents for WAR-191
Page 1: ...5010198 1 OWNER S MANUAL Item No WAR 191 READ BEFORE USE...
Page 11: ......
