12/2019
MZ14204GA
SPIRALING BARREL OUTDOOR WATER FOUNTAIN WITH LED LIGHTS
SSS-320
Read assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components of this fountain on a soft, clean surface to avoid scratching or damaging the finish.
ASSEMBLY
1.
Place the polyurethane foam filter over the drainage holes in the top of the fountain and gently place the fountain lid
onto the fountain.
2.
Locate the water tubing inside the fountain and connect the electric submersible pump.
3.
Connect the LED light to the short cable on the pump.
4.
Ensuring the pump remains on the bottom of the basin, run the long pump cable through the basin tube and out the
backside of the fountain; make sure the cable is beneath the groove on the bottom of the fountain.
5.
Place the leak guard over the basin tube so that the power cord power is within the groove of the leak guard.
6.
Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 2 gallons.
7. Place the debris screen into the base of the fountain.
8. Connect the pump power cable to the adapter cord.
9.
Plug the power cord into a properly grounded GFCI outlet.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Page 1 / 2
Note
: When first used, there may be air in the pump. It may take several minutes for the air to escape and water begins to flow.
NOTES:
The water tubing is built into the fountain. Take care when handling the water tube; detaching the water tube from the fountain will damage the
fountain and void the product warranty.
Do not discard the polyurethane foam filter, it is required to prevent downspout clogging and help control water flow.
Parts
Qty.
Barrel Fountain
1
Fountain Lid
1
Polyurethane Foam Filter
1
Electric Submersible Pump
1
Parts
Qty.
LED Light
1
Leak Guard
1
Debris Screen
1
Adapter Cord
1
Ensure all parts are
accounted for before
disposing of packaging.
(1)
(2)
(3)
(5)
(6)
(4)
(8)
(7)
(9)
