Warning and Safety Concerns
* The pump and halogen light are tested and approved for indoor use only.
* Keep fountain out of reach of children.
* Use proper power source as indicated on water pump label.
* Keep electrical cords away from all heat sources.Do not place electrical cords
in high temperatures.
* Check water level at pump location regularly.To avoid damage the pump must
be fully submerged.
PARTS LIST
A:
B:
C:
D: Ball 1PC
E:
F Transform 1PC
G: Pebbles 1BAG
ASSEMBLY INSTRUCTIONS
1. Locate the base in the desire location.Add water to the level indicated in. (Fig.1)
4. A.Put in rubble stones on top of basin.
B.Plug the power cord into an outlet.(Fig.4)
TROUBLESHOOTING
:
Pump operates, but no water flow:
Water speed:
the pump housing.
Noise from fountain:
3. A. Connect the founatin body with basin.
B. Connect the pump with transform.(Fig.2)
Pump Holder 1PC
Pump 1PC
Fountain Body 1PC
* Make sure pump is fully submerged in water. If there is still no water flow
please turn off the power of the transformer,repeat this step several times.
*
To change the water speed,simply adjust the switch control located on
* Check water level and make sure the pump is completely submerged
WWW.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will
send new parts, or replace products at our discretion within the one year
warranty period. Before we can help ,you will need to provide proof of
purchase with the date of purchase and photos of the defective
B.Put the ball on the top of body.(Fig.3)
2. A.Insert the pump into the pump holder and connect the pump with hose.
Thank you for choosing Sunydaze Décor. If you have any questions,
comments or concerns please feel free to contact us by phone at:
888-881-4668
,by email:
,or you
could also email us via our contact us page at:
Basin 1PC
and for future quality control.
merchandise. We will use the photos to determine the cause of defect
Slate Fountain Instruction
Item#:SPQ0098
Fig.1
Fig.2
Fig.3
Fig.4
