3
Solar Pump Functions:
•
This pump is designed to run from direct sunshine during the day. When the sun goes
down the pump will turn off. If you want to run pump at night you can simply press
the on button to enjoy the fountain until it runs out of charge. Receive up to 4 hours
when batteries are fully charged.
•
The LED light only works at night when the pump is turned on.
•
Pump runs by solar panel during day, in the meantime, part of the solar panel power
will charge batteries. If you want to have the pump run longer at night, you may turn
the pump off during the day and let all the solar energy charge the batteries.
•
Although there may be some initial charge in battery, we recommend fully charging it
before the first use.
Troubleshooting:
•
If your fountain does not work; check solar panel is in correct position and
receiving direct sunlight.
•
Check connections between the Pump/LED and the solar panel.
•
Check water level and make sure the pump is completely submerged in water.
Splashing may occur when the fountain is initially turned on. Protect surrounding surfaces as needed.
We recommend using distilled water. City and Well water can cause mineral deposits
and bacteria build up that could lead to the fountain chipping.
Pump must be fully submersed in water while operating.
Once a week inspect the floor, adjacent wall, and fountain for moisture build-up. Clean as necessary.
This is especially important for humid environments.
This fountain is rated for outdoor use.
If the fountain is not used on a regular basis, unplug the pump and LED light from the solar panel.
Drain fountain and completely dry, move fountain into a dry area for winter storage. Fountain should
not be left out in freezing conditions.
