2
4.
Fill the reservoir with appropriate amount of water to completely
submerse the pump.
NOTE: We recommend using distilled water. City and Well water can cause
mineral deposits and bacteria build up that could lead to the fountain
chipping.
5.
Join the bracket, tube and spike together, then
attach bracket to back of the solar panel as
shown.
6.
Twist the pump and LED light cords into the hole making sure the cords are fully sealed into
the grooves.
7.
Insert spike for solar panel into the ground. Make
sure the solar panel can receive direct sunlight
and is not hidden by shadows. We recommend
letting the solar panel sit out in the sun for 2-3
sunny days before connecting Pump and LED
cords. This will give the solar panel and batteries
a chance to completely charge before use.
8.
Your solar fountain will begin to work when the
solar panel receives direct sunlight. You are also able to press the “on” button to run your
fountain by battery on a cloudy date or at night.
