SPQ50052
Page 1 / 2
NATURAL SLATE FLOOR WATER FOUNTAIN
WITH CLIMBING VINES AND LED LIGHT
GSI-304
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
ASSEMBLY
1. Connect the lid to the fountain body using washers and bolts.
2. Place the light in the basin, run the power cord out the groove in the back of the basin and connect the AC adapter.
3. Connect the leaf decoration to the lid with the washer and bolt.
4. Connect the pump to the fountain body and gently place the connected pieces onto the basin. Secure the
fountain body to the basin using washers and bolts.
5. Place the splash guard on the lid and gently lay the decorative stones on the lid.
6. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 1.5 gallons.
7. Plug the power cords into properly grounded GFCI outlets.
Note
: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
01/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
NOTE:
The water tubing is built into the
fountain body. Take care when handling the
water tube; detaching the water tube from the
fountain will damage the fountain and void the
product warranty.
No.
Parts
Qty.
A
Basin
1
B
Spotlight with AC Adapter
1
C
Bolt
4
D
Washer
4
E
Electric Submersible Pump
1
F
Lid
1
G
Leaf Decoration
1
H
Nut
1
I
Washer
1
J
Fountain Body
1
K
Splash Guard
1
L
Decorative Stones
1
PK
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CONNECTORS
A
B
C
D
E
G
J
K
L
F
I
H
D
C
