Sunny SF-T7635, User Manual, Page: 9 / 25

8
ASSEMBLY INSTRUCTIONS
STEP 1:
STEP 2:
STEP 3:
Open the carton and remove
contents.
Place the Main
Frame (A) on the ground and
ensure you have a work area
that is clean and has adequate
space.
Do not cut the
Packing Belt (I) until the
assembly is complete!
Lift the Console (J) along with
Left & Right Upright Tubes
(A04 & A05) upward (in the
direction specified by the
arrows on the diagram to the
left).
NOTE: When lifting up, avoid
puncturing the wires inside the
Left & Right Upright Tubes
(A04 & A05) as this will cause
damage.
During assembly, support the
Left & Right Upright Tubes
(A04 & A05) with your hands
to prevent them from falling
down.
Fix the
Left & Right Upright
Tubes (A04 & A05) to the
Main Frame (A) using 6 Bolts
(E05) and 6 Washers (E23) .
Secure using Allen Wrench
(No. B07) . Next, tighten the
two already preassembled
Allen Screws (E08) located
on the outer bottom end of the
left and right tubes.