11
ADJUSTMENTS & USAGE GUIDE
33
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you must
ensure that the recumbent bike is stable and secured. If you
notice that the recumbent bike is unbalanced during use, you
should adjust the
End Caps (No. 33)
located on the rear
stabilizer until the recumbent bike becomes levelled with the
surface.
ADJUSTING THE TENSION
Adjust the tension by rotating the
Tension Control Knob
(No. 14)
clockwise
to increase the level of resistance. Rotate
the
Tension Control Knob (No. 14)
counter-clockwise
to
decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level
8 being the highest.
6L/R
5
MOVING THE RECUMBENT BIKE
To move the recumbent bike, hold
Rear Stabilizer (No. 32)
and tilt the recumbent bike until the movable wheels on the
Left & Right
End Caps (No. 6L/R)
located on the front
stabilizer touch the ground. With the wheels on the ground,
you can transport the recumbent bike to the desired location
with ease.
44
ADJUSTING THE SEAT
To adjust the seat forward or backwards, press down
Brake
Handle (No. 44)
, then slide the seat to the desired position.
Lift the
Brake Handle (No. 44)
up to tighten.
CLEANING
The recumbent bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be
careful not to
get excessive moisture on the computer display panel as this might cause electrical
hazard or electronics to fail.
Please keep the recumbent bike, especially the computer, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the recumbent bike for proper tightness every
week.
STORAGE
Store the recumbent bike a clean and dry environment, away from children.
14
32
6L/R