5
STEP: 3
Slide the
Slide Collar (No. 8)
on the
Main Frame (A) (No. 2),
push the collar
backwards until the hole facing outward (shown above), aligns to one of the holes along
the main frame
.
Secure the
Slide Collar (No. 8)
in place using the
Pull Pin (No. 13)
.
Insert
Main Frame (B) (No. 3)
into
Main Frame (A) (No. 2)
, align the holes located on
the bottom of each frame and connect the two frames together using 2 sets of
Bolts &
Washers (No. 17)
. Tighten and secure with Spanner Wrench.
STEP: 4
Connect the
Upright Extension (No. 4)
to the
Main Frame (B) (No. 3)
using 2 sets of
Bolts, Nuts & Washers (No. 16)
. Tighten and secure with Spanner Wrench.
Summary of Contents for SF-BH6506
Page 3: ...2 EXPLODED DRAWING ...
Page 4: ...3 ...
