Sunny Health & Fitness SF-B1709, User Manual, Page: 9 / 15

9
STEP 5:
Remove Hexagon Socket Cap Screw (No.
38) from Handlebar Post (No. 4) using Allen
Wrench (No. 86) . Unscrew preassembled
Bolt (No. 28) and Washer (No. 93) from
Triangle Knob (No. 26) . Place Handlebar
(No. 22) on Handlebar Post (No. 4) . Do not
slide all the way on yet.
Insert Bolt (No. 28) into the hole in the
Handlebar (No. 22) from the bottom. Hold
Bolt (No. 28) on the threaded end to keep it in
place while you slide the Handlebar (No. 22)
onto the Handlebar Post (No. 4) . Make sure
the head of Bolt (No. 28) fits into the groove in
the Handlebar Post (No. 4) . Now slide the
Handlebar (No. 22) all the way on.
Put Washer (No. 93) and Triangle Knob (No.
26) on Bolt (No. 28) . Then turn the Triangle
Knob (No. 26) to tighten. Put Hexagon
Socket Cap Screw (No. 38) into the hole in
the Handlebar Post (No. 4) , and tighten using
Allen Wrench (No. 86) .
Finally connect the Extension Wire 1 (No. 24)
and Extension Wire 2 (No. 37) .
STEP 6:
Attach the Bracket (No. 30) to the Handlebar
Post (No. 4) with 2 Hexagon Socket Cap
Screws (No. 29) using Allen Wrench (No.
94) .
Connect the Extension Wire 2 (No. 37) and
Pulse Wire (No. 25) with wires out of the
Meter (No. 34) , then attach the Meter (No. 34)
to the Handlebar (No. 22) .
Assembly is complete!