Serial Flash Programmer[S550-SFWv3] Operation Manual
96
7.2.3.
Initialization
You can initialize data that is stored in the S550-SFWv3 internal memory on unit basis for security purposes.
The followings are the procedures for initialization.
*For initialized settings (factory settings), see “9.6 Initialized Settings (factory setting) List”.
*Initialization takes 1 to 2 minutes.
①
Connect PC and S550-SFWv3 main unit with USB.
・
For the connection when initializing, see “4.1 Connection for Downloading / Uploading / Initializing”.
②
Confirm S550-SFWv3 start up
・
The start up is complete when the “USB” LED is lit after, “Power” LED on, “Pass”, “ID Err”, “Fail” LEDs
are lit in order one time each then the buzzer sounds.
*If the “Pass” and “ID Err” LEDs are lit and the lower 1byte of the user program checksum is displayed on the center display after the
buzzer sound, the programming data has been downloaded to the S550-SFWv3.
③
Select initialized channel
・
Click the "Initialize" button.
・
The "Initialize Setting" dialog is displayed. Select channels and click "OK" button.
