Sunlux XL-9600, Full Manual

Page: 14 / 28

14
Suffix-Tab
Suffix-Enter&Line
Hidden character Settings
Hide front character
Hide back character
Hide front character
Steps:
(1) Scan the setting code "Hide front character"
(2) Set the first few digits of the sequence to hide, and use two data codes to represent the
decimal number XX
(3) Set how many digits (including their own data) are hidden from the first few digits in the
sequence, using two digits
Data code represents decimal number YY
(4) Finally scan the setting code "Saved and Finished Set".
XX represents the number of digits from the top, that is, it is hidden from the number of
characters in the top (including itself);
YY represents how many digits are hidden, that is, how many digits are hidden in the future
For example: the barcode content is: "ABCDEFGHIJKLMN", hide these characters DEFGH,
Make the output bar code "ABCDIJKLMN".
(1) Scan the setting code "Hide front character"
(2) The position of the character ‘E’ is the 4th bit, so "XX" is ‘0’, ‘4’,
Look up the data code table and scan the data code table ‘0’ and ‘4’ in turn;
(3) Hidden "DEFGH" means a total of 5 characters, so "YY" is ‘0’, ‘5’,