Instructions for Use
1. Please consult with a licensed electrician prior to installation
of the
Helios 8.
High voltage can be dangerous!
2. Connect 240 volt power to the 3 screws under the protective
cover. (See ‘Instructions for Operation’ section).
3. Replace protective cover with screws provided.
4. Securely mount your
Helios 8
, with hardware provided, near
the ballasts to be operated. It should be placed away from
water, mist, spray, etc.
5. Plug your 240 volt ballasts into the multi-tap outlets on the
left and right side of the controller.
6. Plug the relay activation cord set into Apollo Series wall timer.
7. Your
Helios 8
will now control your ballasts at the desired
settings until the power is defeated.
Helios 8
TM
8 Light - 240 Volt Lighting Controller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
®
Easy Guide
Controller Specifi cations
Size: 13"H x 11"W x 4"D
Weight: 10 lbs.
Voltage Input: 240 volts
Voltage Output: 240 volts
Maximum Amperage: 40 amps
Maximum Wattage: 8000 Watts
Hertz: 60 Hz
Time Switch: Two(2)120 Volt relay trigger cord sets
Operating Temperature: 40
°
to 125
°
F | 5
°
to 52
°
C
Storage Temperature: 32
°
to 135
°
F | 0
°
to 57
°
C
to 50 Amp
Power Source
to 240 Volt Ballast
to 240 Volt Ballast
Helios 8
240 Volt
Sun System
R
Sun System
R
to 240 Volt Ballast
to 240 Volt Ballast
to 240 Volt Ballast
to 240 Volt Ballast
to 240 Volt Ballast
Sun System
R
to 240 Volt Ballast
Sun System
R
Sun System
R
Sun System
R
Sun System
R
Sun System
R
120 Volt
to 120 Volt
Timer
Titan Apollo
24 HR
Timer
120 Volt
Titan Apollo
24 HR
Timer
Wiring
diagram
Hot
Neutral
Hot
Ground
Controlling a light bank
®
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.