background image

March 2016 

Made in China 

 

1

 / 

7

 

ASSEMBLY INSTRUCTIONS 

D-GZ761PST-A SHELTER 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. 

All you will need is a hammer and ladder (not included) whose height is no less than 2.5m. 

 

Item Identification:

 

For ease of identification, all parts are labeled to correspond to the Step number in which the 

part is used. 

 

PRECAUTIONS: 

 

This unit is heavy. Do not assemble this item alone. 

 

Do not cook underneath canopy.   

 

Do not ignite fireworks underneath canopy. 

 

Do not bleach canopy to clean. 

 

Do not dry clean. 

 

Do not wash in washing machine or dry in dryer. 

 

Lower and secure side panels if open in stormy conditions. 

 

Be certain to brush snow off cover in winter 

 

This is a temporary structure and is not recommended as a permanent structure. 

 

IMPORTANT 

For technical assistance on assembly or replacement parts, you can call us toll-free at 1-866-578-6569 from 8 a.m. EST 

to 8 p.m. PST 

or email to [email protected] or visit www.sunjoyonline.com to place your order or fax 

your parts replacement order form together with your purchase receipt to 1-740-283-3549 for assistance.

 

 

Summary of Contents for D-GZ761PST-A








Reviews: