17. Insert a cotter pin into the inner hole on the axle, and bend
each tip of the cotter pin outward and backward around
the axle to secure it (Fig. 16).
18. Then place a flat washer #1, an inflated wheel, and
another flat washer #1 onto the axle (Fig. 17).
19. Secure the wheel with another cotter pin on the outer hole
at the end of the axle (Fig. 18).
20. Repeat steps 17 – 19 to assemble the other wheel.
21. Tighten the two nuts on the axle clamps on both sides
(Fig. 18).
22. Turn cart right side up so the cart rests on its wheels. Slide
the front panel in to complete assembly (Fig. 19).
Fig. 15
Axle
Axle clamps
Fig. 16
Cotter pin
Cotter pin tips
Wheel
Fig. 17
Flat washer #1
Flat
washer #1
Fig. 18
Cotter
pin
Nuts
Front
panel
Fig. 19
7
EN
