___________________________________________________________________________________
6
1.1 Overview
Thank you for purchasing SUNIX M.2 PCI Express Multi-Port Communication
Board; it is compatible with RS-422 and RS-485 standard serial interfaces.
User can expand Multi RS-422/485 ports on PC-based system by installing a
M.2 (NGFF) Type 2280 Key-B or Key-M module over PCI Express
communication. Each serial port has on-chip hardware and software flow
control, a built-in 128-byte Tx/Rx FIFO, and WHQL certificated device drivers.
This board is designed with SUNIX 16C950 UART controller and as well as
building in with many of SUNIX advanced features and technologies, making it
the best solution for commercial and industrial automation applications.
1.2 Package Checklist
Please check if the following items are present and in good condition upon
opening your package. Contact your vendor if any item is damaged or missing.
1. Hardware:
1). Serial Communication Board:
M.2 PCI Express RS-422/485 Multi-Port Communication Board
×
1pcs
* IPC-M2204S
– M.2 4-port RS-422/485 Type2280 with 180°wafer
* IPC-M2204SR
– M.2 4-port RS-422/485 Type2280 with 90°wafer
* IPC-M2204S
– M.2 2-port RS-422/485 Type2280 with 180° wafer
* IPC-M2204SR
– M.2 2-port RS-422/485 Type2280 with 90°wafer
2). D-Sub 9 pin male with nuts Cable. (Product Dependent)
* 4 ports series: D-Sub 9 pin male with nuts Cable, 30cm
×
4pcs
* 2 ports series: D-Sub 9 pin male with nuts Cable, 30cm
×
2pcs
2. CD Driver
3. User's Manual (This document)
