16
2.3.4
Interface settings
◼
DP I/O Interfaces settings
1. Select Interfaces from the menu.
2. Preset or click Interfaces.
3. The page will display all I/O settings connected to DP.
4. Configure each I/O (I/O types include Serial, DIO, and AI), then click Config.
5. Click Serial and the UART Setting page above will appear.
6. Set and confirm if the settings need to be uploaded to Central.
7. Select whether Device Model needs to be applied.
8. The DI Settings page.
9. The DO Settings page.
Summary of Contents for EZG1200
Page 17: ...17 10 The AI Settings page...
