ECO Spot
TM
LED25 User Manual
Copyright © 2013 Sunhope Inc
Page
1
of
4
Thank you for choosing our ECO Spot
TM
LED25 Gobo
projector (SKU: ES-LED25). This unit is equipped with a fan
cooled 25W LED light bulb with 50,000 hours bulb life. No
more need for replacement bulbs.
Please read this manual before installing or operating this
fixture, follow the safety precautions listed below and observe
all warnings.
Package Contents
•
Projector with power cord and integrated gobo holder and rotator
•
Spare gobo retaining ring and spare drive belt
Safety Information
•
This product is not for household use, it presents risks of severe injury or death due to fire
and burn hazards, electric shock, lamp explosion and falls.
•
Place your fixture at a suitable place with good air flow.
•
Keep flammable materials away from the fixture.
•
Minimum distance to flammable material = 1 ft (0.3m).
•
Minimum distance to illuminated surface = 3.3 ft (1.0m).
•
Provide a minimum clearance of 4 in (10cm) around air vents.
•
Use only genuine spare parts for part replacement.
•
Do not look directly into the lamp; it can result in eye damage.
•
Don’t touch the hot surface during operation, use gloves if necessary.
•
Always unplug the unit from the power mains before any service is done.
•
Allow 20 minutes to cool down before servicing the unit.
•
Replace Lamps only with the same type other lamps may cause damage.
•
Light fixtures should be installed and maintained only by qualified personnel with
experience in lighting equipment and general electrical experience.
Electrical Safety
•
Disconnect the fixture from AC power before handling the fixture.
WARNING! Select the correct Line Voltage with the
selector on the back of the unit before Operating.
